EQSFP28-SR4

EQSFP28-SR4

100G BASE-SR4 QSFP28 850nm 100m DOM MPO MMF

 

Description: 

The EQSFP28-SR4 is a transceiver module designed for 100m optical communication applications. The design is compliant to 100GbASE-SR4 of the IEEE 802.3-2012 Clause 88 standard IEEE 802.3bm CAUI-4 chip to module electrical standard ITU-T G.959.1-2012-02 standard . The module converts 4 inputs channels (ch) of 25.78Gbps to 27.95Gbps electrical data to 4 lanes optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 100Gb/s input into 4 lanes signals, and converts them to 4 lanes output electrical data.
An optical fiber ribbon cable with an MPO/MTP connector at each end plugs into the QSFP28 module receptacle. The orientation of the ribbon cable is “keyed” and guide pins are present inside the module’s receptacle to ensure proper alignment. The cable usually has no twist (key up to key up) to ensure proper channel to channel alignment. Electrical connection is achieved though a z-pluggable 38-pin IPASS® connector.The module operates from a single +3.3V power supply and LVCMOS/LVTTL global control signals
 

 


Features:  

 -4 independent full-duplex channels
 -Up to 27.95Gbps per channel bandwidth
 -Aggregate bandwidth of > 100Gbps
 -MTP/MPO optical connector
 -QSFP28 MSA compliant
 -Compliant with IEEE 802.3-2012 Clause 88 standard IEEE 802.3bm CAUI-4 chip to module  electrical standard ITU-T G.959.1-2012-02 standard
 -Digital diagnostic capabilities
 -Single +3.3V power supply operating
 -Temperature range 0°C to 70°C
 -RoHS Compliant Part
 -Support FEC(Forward Error Correction)

 

Mechanical Dimensions

 

                                                                                                            

ดาวน์โหลด  Datasheet  

Visitors: 77,814